Datexel DAT8016 설정 매뉴얼 - 페이지 2

{카테고리_이름} Datexel DAT8016에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Datexel DAT8016 4 페이지. Modbus tcp th ermocouple input module

Select the Language.

1. Click English.

2. Click enter.

Th e device name should appear in the center

of the page. You are also able to "Logout" of the

DAT8016, go "home", or go "back" to the page

before, by clicking the icons on the page.

How to read the Analog Input

Signal.

1. Click the Analog Input at the bottom of the

page.

2. Select the type of input being measured.

3. Select Tc K for K type thermocouple.

4. Click Save to save to the DAT8016.

5. Click Read to measure the Input.

6. Adjust the calibrator to check the range.

Th e input selection can be seen below.

250mV, J type thermocouples, K type ther-

mocouples, R type thermocouples, S type

thermocouples, T type thermocouples, B type

thermocouples, E type thermocouples, N type

thermocouples.

Each input can be diff erent and they are all iso-

lated from each other.

Th e red indication under Break means the input

is open circuit. By clicking the "Set Same Input"

button you enable all the inputs to be the same as

Analog Input 0.

2 of 4