ADE AUTOMATIC-L 사용 설명서 - 페이지 3

{카테고리_이름} ADE AUTOMATIC-L에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ADE AUTOMATIC-L 16 페이지.

This symbol means: "Observe operating instructions." Read these operating

instructions carefully and observe the information contained therein. Keep these

operating instructions handy for future reference.

This publication contains all the information necessary for the installation, operation, and

maintenance of the slicers.

With it, the manufacturer intends to furnish the customer with clear and concise instructions for the

use and maintenance of the machine, as well as information regarding the safety devices with which

it is fitted to assure maximum efficiency throughout its service life.

The slicers may be updated; this eventuality shall not prejudice the instructions and explanations

contained in the manual.

Before starting up the slicer, you must read this manual carefully.

Should this manual be damaged or lost, apply for a copy from the manufacturer immediately.

Many accidents and injuries that occur when using the machine result from insufficient familiarity with

its functions and safety devices. Before starting work with the machine, please read the instructions

herein carefully and follow them to the letter.

The slicers have been designed to comply with applicable safety standards. Consequently, all our

slicers are fitted with a plate featuring the "CE" mark attesting to the product's conformity with said

provisions.

These slicers have been manufactured to slice:

cooked and raw charcuterie,

warm and cold meats,

bread and cheese,

stoneless fruit and vegetables.

The machine is intended for continuous operation in commercial gastronomic applications. It can

slice thicknesses up to 15 mm.

The slicers must never be used for cutting frozen goods, charcuterie, and meat

on the bone or fruit with stones. Any attempt to slice said products or similar

foods may result in severe damage to the machine and shall cause the warranty

to become void.

Automatic-L-230411-Rev002-UM-en

FOREWORD