ADE AUTOMATIC-L 사용 설명서 - 페이지 6

{카테고리_이름} ADE AUTOMATIC-L에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ADE AUTOMATIC-L 16 페이지.

4.4 Mechanical safety devices

- Except for the actual cutting section, the blade is protected by an irremovable guard, which cannot

be removed.

- The product carriage can only be removed if

o the stop plate covers the blade, and the graduated knob for cutting thickness adjustment is

set to "0" (zero) or beyond that up to the stop,

o the product carriage is in the position closest to the operator, and

o the tappet on the product carriage has been disengaged from the automatic guide.

- The slice assembly can only be opened (using the graduated knob) if the product carriage is

secured in its normal operating position.

- The blade can be removed. In any case, the user must exercise particular caution and care. Cut-

resistant gloves must be worn for this purpose.

- All safety devices are permanently installed on the machine and must not be removed. Dismantling

or tampering with them or any unauthorized modifications would make the machine unsafe.

This will result in the manufacturer no longer being responsible for accidents or injuries.

- Make sure all the slicer components are correctly assembled.

- Press the green start button and red stop button and check that the machine can be switched on

and off.

- Check the sliding of the product carriage and food holder.

- Check the opening of the slice assembly.

- Check that the product carriage can only be removed in the following cases: if the graduated knob

for cutting thickness adjustment is set to "0",

o if the stop plate covers the blade and the graduated knob for cutting thickness adjustment is

set to "0" (zero) or beyond that up to the stop, and

o if the product carriage is in the position closest to the operator.

- Check that the slice assembly cannot be opened when the product carriage is removed from the

machine.

In the event of malfunctions, immediately shut down the machine, tag it clearly

as "DEFECTIVE," and contact customer service!

Automatic-L-230411-Rev002-UM-en