ADE AUTOMATIC-L 사용 설명서 - 페이지 8

{카테고리_이름} ADE AUTOMATIC-L에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ADE AUTOMATIC-L 16 페이지.

5.2 Automatic operation

Move the tappet to the right position first to enable the product carriage to be driven automatically in

automatic mode. Manually engage the product carriage in the automatic drive by moving it back

and forth.

To start the machine in automatic mode, press the green start button twice. The green and blue

lights on the start button indicate automatic operation. The product carriage will be moving back

and forth automatically.

Although it is possible to switch from manual to automatic mode by pressing the green start button,

you must switch off the machine first and change the position of the tappet. This significantly

reduces the risk of injury.

Before switching from normal to automatic mode, ensure the product carriage

can move freely and that there are no obstacles in its path.

To switch off the machine, press the red stop button.

1. Set the graduated knob for cutting thickness adjustment to "0" (zero).

2. Move the product carriage as far away from the blade as possible.

3. Lift the food holder using the food holder handle only. Set the product down on the product

carriage and lower the food holder onto or behind the product.

4. If necessary, use the guide to fix the product.

5. Select the desired thickness using the graduated knob.

6. Press the green start button.

7. Push the product carriage back and forth to slice the product using the handle of the product

carriage or food holder. Alternatively, use the automatic mode.

8. Once you have finished using the machine, switch it off by pressing the red stop button and

set the graduated knob for cutting thickness adjustment to "0".

Automatic-L-230411-Rev002-UM-en