Datron ABB1000 기술 매뉴얼 - 페이지 15

{카테고리_이름} Datron ABB1000에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Datron ABB1000 16 페이지. Broadband antenna

Replacing the Transformer Coax

The transformers are built so that the coax can be replaced if neces-

sary. To replace the coax to the transformer:

Loosen the nut on the strain relief and pull the coax through the

strain relief. This exposes the lead-in wires used to attach the

coax to the balun inside the transformer assembly.

Cut the coax off at the end of the lead-in wires (cutting off as lit-

tle of the lead-in wires as possible).

Prepare and reattach the coax to the lead-in wires.

Stuff the lead-in wires and coax back through the strain relief.

Tighten the nut on the strain relief.

Transformer body

Strain Relief

Assembly

+--

Splice

___

Bushing

.--

Washer

+--

Knurled Nut

ASS 1OOO-MSc

Figure 9

Replacement of Transformer Coax