Datron ABB1000 Technisch handboek - Pagina 15

Blader online of download pdf Technisch handboek voor {categorie_naam} Datron ABB1000. Datron ABB1000 16 pagina's. Broadband antenna

Replacing the Transformer Coax

The transformers are built so that the coax can be replaced if neces-

sary. To replace the coax to the transformer:

Loosen the nut on the strain relief and pull the coax through the

strain relief. This exposes the lead-in wires used to attach the

coax to the balun inside the transformer assembly.

Cut the coax off at the end of the lead-in wires (cutting off as lit-

tle of the lead-in wires as possible).

Prepare and reattach the coax to the lead-in wires.

Stuff the lead-in wires and coax back through the strain relief.

Tighten the nut on the strain relief.

Transformer body

Strain Relief

Assembly

+--

Splice

___

Bushing

.--

Washer

+--

Knurled Nut

ASS 1OOO-MSc

Figure 9

Replacement of Transformer Coax