Australian massage group AMG-3800 사용 설명서 - 페이지 8
{카테고리_이름} Australian massage group AMG-3800에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Australian massage group AMG-3800 10 페이지. Four-wheel driven, muted, intelligent massage hands
페이지 인쇄Method of Usage
•
Remove the screw on the front-end of the armrest (Note: The screw is in the side of steel
frame). (Figure 7)
Remove the screw on the front-end of the armrest (Note: Be careful not to miss the fixed
•
plastic block). (Figure 8)
•
Remove the screw on the back-end of the armrest (Note: Zip the backrest kneading cloth
open completely to find it). (Figure 9)
•
Gently lift up the front-end of the armrest and pull out the buckle. (Figure 10)
•
Gently pull forward the back-end of the armrest to pull out the decoration cover, then lift up
the back-end of the armrest to pull out the buckle. (Figure 11)
•
Unplug the joint of the upper armrest air pipe to remove the armrest completely. (Figure 12)
Method of Usage
5. Armrest installation method
•
Connect the air pipe on the back-end of the armrest to the upper arm. (Figure 1)
Put the air pipe and power cord into the steel frame (Note: Avoid getting the air pipe stuck).
•
(Figure 2)
•
Hook the back-end of the armrest on the steel frame (Note: There are two; place it on the
upper one). (Figure 3)
•
Insert the back-end of the armrest into the decoration cover of the upper arm. (Figure 4)
•
Hook the front-end of the armrest on the steel frame and lock the buckle. (Figure 5)
•
Gently push the armrest down, and double check that the hook is well locked. (Figure 6)
•
Put the plastic block between the armrest and the calf rest pothook, then tighten the up and
down screws. (Figure 7)
•
Tighten the screws on the back-end of the armrest. (Figure 8)