ADE FL-N Series 운영 매뉴얼 - 페이지 6

{카테고리_이름} ADE FL-N Series에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ADE FL-N Series 20 페이지.

Check the scope of delivery for completeness immediately after receipt of the machine. Carefully

remove the machine and accessories from the packaging and remove all packaging materials.

The scope of delivery includes:

 1 FL series meat mincer:

 5-piece coded UNGER cutting set:

 1 hand wheel

 1 filling tray

 1 collecting tray

 1 darner

 1 spacer ring

 1 withdrawing hook

 1 operating manual

The meat mincer is delivered in a stable packaging box that is strong enough for transport.

Take the meat mincer out of the packaging. Due to its weight, this should be done by two adult

persons.

Place the machine on a working surface that provides sufficient strength and stability to ensure

adequate safety, taking into account the machine's own weight.

Depending on the size of the operator, the machine should not be too high to allow comfortable and

effortless operation!

The machine is most conveniently positioned when the switch points towards the operator and the

outlet opens to the left.

First of all, it is absolutely necessary to place the filling tray (38) on the

housing, since the meat mincer cannot be operated without it.

Then, the seat of the hand wheel (33) must be checked.

For safe operation of the cutting set, the hand wheel is first tightened

slightly and then released by approx. 5°.

Insert the plug into a suitable three-phase socket and the machine is

then ready for use.

Installing and setting up the meat mincer

incl. 1 worm housing

incl. 1 worm

1 pre-cutter

2 cross blades

1 perforated disc, 3 mm hole diameter

1 perforated disc, 8 mm hole diameter

5°

FL-200128-Rev007-UM-en