ADE HANSEAT 250-230 운영 매뉴얼 - 페이지 5

{카테고리_이름} ADE HANSEAT 250-230에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ADE HANSEAT 250-230 20 페이지. Gravity feed slicers

3. OPERATING FEATURES AND SAFETY PRECAUTIONS

The slicing machines are electrically operated by means of two buttons: a green operating button I

and a red stop button O.

In addition, the machine has a yellow control lamp within the green operating button to display

"cutting blade in operation".

The slicing machine was equipped with a circuit breaker within the cutting blade guard, which is

triggered when the voltage drops (NVR).

The operating button I must be pressed after each interruption of the machine operation due to a

voltage drop in order to restart it.

- The cutting blade is fully protected by a rigidly mounted cover, except for the section necessary

for the cutting operation.

- The food carriage can only be removed if the stop plate covers the cutting blade and the slice

thickness setting knob with scale division is set to "0" (zero) or beyond all the way to the stop.

- The slice thickness selector can only be opened using the knob when the food carriage is in its

normal operating position.

- The cutting blade can be removed using chain gloves or using the optionally available blade

removal device. In any case, the user must exercise particular caution and care.

- All fuses are mounted on the machine and must not be removed. Scrapping or unauthorised

modifications to the machine make it a dangerous device. In such cases, the manufacturer cannot

be held liable for any accidents or injuries.

- Check whether all the components of the slicing machine were correctly assembled.

- Check whether the crank wheel to secure the cutting blade guard is locked.

- Press the operating button and check whether the machine can actually be switched on and off.

- Check the sliding motion of the food carriage and remnant holder.

- Check the operation of the grinder.

- Check the opening of the slice thickness selector.

Hanseat-210617-Rev008-UM-en