ADE HANSEAT 250-230 Посібник з експлуатації - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Кухонна техніка ADE HANSEAT 250-230. ADE HANSEAT 250-230 20 сторінок. Gravity feed slicers
Друкувати сторінку
3. OPERATING FEATURES AND SAFETY PRECAUTIONS
3.1 Operating features
The slicing machines are electrically operated by means of two buttons: a green operating button I
and a red stop button O.
In addition, the machine has a yellow control lamp within the green operating button to display
"cutting blade in operation".
The slicing machine was equipped with a circuit breaker within the cutting blade guard, which is
triggered when the voltage drops (NVR).
The operating button I must be pressed after each interruption of the machine operation due to a
voltage drop in order to restart it.
3.2 Mechanical fuses
- The cutting blade is fully protected by a rigidly mounted cover, except for the section necessary
for the cutting operation.
- The food carriage can only be removed if the stop plate covers the cutting blade and the slice
thickness setting knob with scale division is set to "0" (zero) or beyond all the way to the stop.
- The slice thickness selector can only be opened using the knob when the food carriage is in its
normal operating position.
- The cutting blade can be removed using chain gloves or using the optionally available blade
removal device. In any case, the user must exercise particular caution and care.
- All fuses are mounted on the machine and must not be removed. Scrapping or unauthorised
modifications to the machine make it a dangerous device. In such cases, the manufacturer cannot
be held liable for any accidents or injuries.
3.3 Inspection test
- Check whether all the components of the slicing machine were correctly assembled.
- Check whether the crank wheel to secure the cutting blade guard is locked.
- Press the operating button and check whether the machine can actually be switched on and off.
- Check the sliding motion of the food carriage and remnant holder.
- Check the operation of the grinder.
- Check the opening of the slice thickness selector.
Hanseat-210617-Rev008-UM-en
4