AUSTRALIAN MONITOR MX81 설치 및 운영 매뉴얼 - 페이지 6

{카테고리_이름} AUSTRALIAN MONITOR MX81에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AUSTRALIAN MONITOR MX81 12 페이지. 8 channel 1 ru mixer
AUSTRALIAN MONITOR MX81에 대해서도 마찬가지입니다: 사양 (2 페이지)

페이지 인쇄

INTERNAL ADJUSTMENTS

P/P – PHANTOM POWER

This switch is accessible through the lid of

the MX81. 15V phantom power is available

for condenser or electret microphones on

the XLR input when this switch is in the

'ON' position.

CHANNEL 1 ROUTING

If channel 1 is being used as a priority

input it can be routed so that the master

volume does not affect channel 1.

The default factory setting is pre master

fader meaning the master volume affects

channel 1 in the mix. The jumper header

is located mid way above channel 1 pot.

Move the jumper to link the two pins

nearer the channel 1 pot to set channel 1

to post master fader.

PAGE 6

HEADPHONE ROUTING

The headphone level can be routed so

that it is affected by the master volume.

The default factory setting is pre master

fader meaning the master volume does

not affect the headphone volume.

The jumper header is located just behind

the front panel above the master pot.

Move the jumper to link the two pins

nearer the inputs to set the headphone

to post master fader.

OPTIONAL MODULES

The MX81 can have installed:

a VCA module

a Tone Generator module

a Priority Muting module

See your local Australian Monitor dealer

for more information.

MX81 INSTALLATION & OPERATION MANUAL