AUSTRALIAN MONITOR MX81 Installation And Operation Manual - Page 6
Browse online or download pdf Installation And Operation Manual for Music Mixer AUSTRALIAN MONITOR MX81. AUSTRALIAN MONITOR MX81 12 pages. 8 channel 1 ru mixer
Also for AUSTRALIAN MONITOR MX81: Specifications (2 pages)
Print Page
INTERNAL ADJUSTMENTS
1
2
1
P/P – PHANTOM POWER
This switch is accessible through the lid of
the MX81. 15V phantom power is available
for condenser or electret microphones on
the XLR input when this switch is in the
'ON' position.
2
CHANNEL 1 ROUTING
If channel 1 is being used as a priority
input it can be routed so that the master
volume does not affect channel 1.
The default factory setting is pre master
fader meaning the master volume affects
channel 1 in the mix. The jumper header
is located mid way above channel 1 pot.
Move the jumper to link the two pins
nearer the channel 1 pot to set channel 1
to post master fader.
PAGE 6
4
3
HEADPHONE ROUTING
The headphone level can be routed so
that it is affected by the master volume.
The default factory setting is pre master
fader meaning the master volume does
not affect the headphone volume.
The jumper header is located just behind
the front panel above the master pot.
Move the jumper to link the two pins
nearer the inputs to set the headphone
to post master fader.
4
OPTIONAL MODULES
The MX81 can have installed:
-
a VCA module
-
a Tone Generator module
-
a Priority Muting module
See your local Australian Monitor dealer
for more information.
4
MX81 INSTALLATION & OPERATION MANUAL
4
3