AUSTRALIAN MONITOR MX81 Installation And Operation Manual - Page 7
Browse online or download pdf Installation And Operation Manual for Music Mixer AUSTRALIAN MONITOR MX81. AUSTRALIAN MONITOR MX81 12 pages. 8 channel 1 ru mixer
Also for AUSTRALIAN MONITOR MX81: Specifications (2 pages)
Print Page
INPUT CONNECTIONS
For wiring balanced in, pin 2 is hot. Unbalanced wiring on the
microphone inputs is not recommended. Balanced input wiring
(shielded pair cable) is recommended.
Unbalanced RCA wiring should be keep as short as possible.
Typically less than 3m.
LINE OUTPUT
The LINE output XLR can be used to connect up to 6 booster amplifiers.
Balanced wiring (shielded pair cable) is recommended.
NOTE: When wiring the LINE output as unbalanced,
Pin2 should be wired as hot and Pin1 should be wired
as ground/shield. Do not wire Pin3.
RECORD OUTPUT.
The Record output wiring should be kept as short as possible.
Typically less than 3m.
TROUBLE
Power LED not on
Poor S/N ration
Distorted sound
No sound but unit is on
Tones and/or VCA control does not work
Condenser microphone does not work
MX81 INSTALLATION & OPERATION MANUAL
INSTALLATION & TROUBLESHOOTING
LIKELY CAUSE
Power not reaching unit
Incorrect gain structure
Input is overloaded
Output is being over driven
Volume turned down
Module not installed
Phantom power not switched on
REMEDY
Check mains connection
Check mains fuse
Check power switch is on
See setup guide
Reduce input gain
Reduce input level at source
Reduce output volume
Check volume controls
Purchase optional modules
Switch on phantom power
PAGE 7