AUSTRALIAN MONITOR SM12 운영 매뉴얼 - 페이지 7
{카테고리_이름} AUSTRALIAN MONITOR SM12에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AUSTRALIAN MONITOR SM12 12 페이지. Stereo mic/line mixing consoles pro series
AUSTRALIAN MONITOR SM12에 대해서도 마찬가지입니다: 브로셔 (4 페이지), 운영 매뉴얼 (9 페이지)
페이지 인쇄
38
INSERTS 1-4 (1-8 ON THE SM16)
An insert point is provided for each
Mono Channel on the SM12 and SM16
mixing consoles. These insert points are
a split of the channels input signal
which is post input gain and Low cut
filter with the return path pre EQ. These
inserts are 6.35mm TRS sockets with Tip
being send and ring being return.
39
40
41
39
POWER
This switch turns mains power "on" to
the mixer
40
AC POWER
This is the connection for the supplied
AC power supply.
Please use supplied mains
power supply only. Always
connect the power supply to the
mixer before connecting to the
mains supply.
SM12 & SM16 OPERATION MANUAL
Tip = Send, Ring = Return
42
41
PHANTOM
This switch turns 48 volt phantom power
"on" to all mono channels. Phantom
power is required for Electret or
Condenser style microphones
42
STEREO OUT
Both balanced XLR and 6.35mm TRS
jacks are included and provide Stereo
mix output at the level set by the Master
output fader. Both sets of outputs can
be used simultaneously.
REAR PANEL
PAGE 7