AUSTRALIAN MONITOR TX8202 사양
{카테고리_이름} AUSTRALIAN MONITOR TX8202에 대한 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. AUSTRALIAN MONITOR TX8202 2 페이지. 8 channel 1 ru mixer
AUSTRALIAN MONITOR TX8202에 대해서도 마찬가지입니다: 운영 매뉴얼 (11 페이지), 사양 (2 페이지)
페이지 인쇄
Description
The TX8202 is a high performance 8 channel stereo mixer suitable for desk or rack mounting.
Inputs and Outputs
TX8202
The TX8202 has four active balanced mic/line inputs and four stereo line inputs. Each channel
features recessed treble, bass and pan controls. Mic/Line level can be adjusted per channel via a
dip switch. All mic and line input connections are via 3 pin XLR female sockets, and all stereo line
8 Channel Stereo Mic/Line
input connections are via dual female RCA sockets. Both the Left and Right outputs are balanced
Mixer with Direct Outputs
and feature 3 pin male XLR sockets. A stereo tape output using dual female RCA sockets is also
provided. A ¼" stereo headphone socket is included on the front panel. The rear panel includes a
terminal block for activation of the optional Tone Generator. The fi rst four channels feature a line
level direct output which can be used to feed additional amplifi ers, mixers or recording devices.
An internal jumper allows the fi rst four inputs to be removed from the master left/right outputs
whilst still retaining their direct output function.
Controls and Metering
Front panel controls include Master Left and Right Outputs plus individual channel level controls.
Each channel also features a recessed, screwdriver adjustable treble, bass and pan control.
A four position dip switch (mic/line, phantom power, routing) is provided for the fi rst four channels.
A 7 segment LED meter is provided for both the Left and Right Outputs. A power "on" orange LED
is part of the LED meter. An optional remote master VCA is available for remote master volume
control.
VCA Control
The optional VCA control module (AMVCA) allows the master volume to be remotely controlled.
External VCA control would normally be via potentiometer connected to a two wire rear panel
barrier strip.
Muting
Muting is standard on the unit for channels one and two. Both channels have equal priority and
will mute channels 3-8 when signal is present. The muting function can be disabled by moving
an internal jumper.
Tone Generators
Bell, Pre-Announce Chime, Evacuate and Alert are included in the unit. Each tone can be
activated by a simple contact closure using the rear panel terminal block.
Phantom Power
Phantom Power (15V DC) is available on all mic inputs and can be disabled if required via a
dip switch.
Accessories
AM Tone1 – This module provides simple 4 tone generation for the MX series mixers.
Tones available are alert, evac, pre-announce, and bell.
AM Tone – This module allows for high quality pre-announce, bell, alert, evac, tones,
to be generated on board the MX series mixers.
AM VCA – This module allows for a remote master volume control to be used with the
MX series mixers.