AUSTRALIAN MONITOR ES Series 운영 매뉴얼 - 페이지 10
{카테고리_이름} AUSTRALIAN MONITOR ES Series에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AUSTRALIAN MONITOR ES Series 17 페이지. Rackmount mixer
AUSTRALIAN MONITOR ES Series에 대해서도 마찬가지입니다: 설치 및 운영 매뉴얼 (13 페이지)
페이지 인쇄INSTALLATION CONT.
ES60/ES120 only
Minimum total
speaker impedance
ES60
ES120
166Ω
83Ω
10
ES SERIES INSTALLATION AND OPERATION MANUAL
NOTE: Only connect one output – either 100V or 4Ω
LINE OUTPUT
The LINE output XLR can be used to connect up to 6 booster amplifiers.
Balanced wiring (shielded pair cable) is recommended.
NOTE: When wiring the LINE output as unbalanced, Pin2 should be wired as hot
and Pin1 should be wired as ground/shield. Do not wire Pin3.
REC OUTPUT
The REC output wiring should be kept as short as possible.
ES250
INPUT CONNECTIONS
40Ω
For wiring balanced in, pin 2 is hot. Unbalanced wiring on the microphone inputs
is not recommended.
Balanced input wiring (shielded pair cable) is recommended. Unbalanced RCA
wiring should be keep as short as possible.
Female XLR
Pin1 Gnd
Pin3 Cold -
Pin2 Hot +
Male XLR
Pin2 Hot +
Pin3 Cold -
Pin1 Gnd
RCA
Tip: Hot +
Shield: Gnd