Australtek DASH V3.X SERIES 기술 매뉴얼 - 페이지 10

{카테고리_이름} Australtek DASH V3.X SERIES에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Australtek DASH V3.X SERIES 17 페이지.

DASH 3.x Series

Basic Troubleshooting

Symptoms

DASH is not

responding. No led

activity.

DASH can't configure a

valid IP.

DASH can´t connect

with server.

Micro SD failed.

Loss of Data.

http://www.dzsupervision.com

Posible Reasons

The device is disconnected.

Power cable is damaged.

Wi-Fi signal quality is not strong

enough.

Bad setting of Wi-Fi configuration.

DASH in not connected to

internet.

Server has no access to the

DASH's network.

Micro SD card is damaged.

DASH is overloaded.

Solutions

Connect the DASH to a power supply (100-240

VAC).

Replace the interlock power cable.

Check that the antennas are well screwed. If

they are, try replacing them.

Check the Wi-Fi signal quality in the area.

Check saved configuration on internal Micro SD

card.

See "DASH can't configure a valid IP".

Check if the server is visible from the DASH's

network.

Replace the internal Micro SD card for a new

one.

Remove DOTs connected to the DASH, one by

one, until data is displayed in real time and no

data is missing.