Austrian Audio 9000-0061-9949 소유자 매뉴얼 - 페이지 3
{카테고리_이름} Austrian Audio 9000-0061-9949에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Austrian Audio 9000-0061-9949 5 페이지. Large-diaphragm condenser microphone with multiple polar patterns
페이지 인쇄
Dual Mode and PolarDesigner:
The second output on the rear side of the microphone can deliver the signal of the back membrane,
while you get the front capsule from the regular XLR plug.
Just plug in the OCC8 mini XLR cable supplied with your OC818, and
set the polar pattern switch to the position showing the 2 cardioids.
The OC818 will now work in dual mode, with both capsule
membranes being transmitted independently.
In dual mode, you may record the two signals to two tracks and use our PolarDesigner plugin later to
modify the polar pattern in post-production. Polardesigner lets you even choose the polar pattern for
up to five different frequency bands.
Note: Make sure phantom power (P48) is provided to the main (3-pin) XLR output also in dual mode.
The second (rear) output can be operated with or without feeding phantom power.
How to Operate the OCR8 (sold separately):
The OCR8 connects your OC818 microphone to your smart device (Smartphone or
Tablet) via Bluetooth.
Download the App
Download the Austrian Audio App (containing PolarPilot) from the Apple™ App
Store™ or the Google Play™ Store.
Please make sure that your device is running the latest version of its operating
system.
The minimum requirement at the time of the initial release, is: iOS™ 11 or Android™ 5. Also, the
device must support BLE (Bluetooth Low Energy also called Bluetooth LE or Bluetooth Smart).
Current mobile devices are commonly released with hardware and software for Bluetooth Low
Energy, and almost all devices running these operating systems will be compatible.
As the App is using Bluetooth, please ensure that Bluetooth is switched on. Some devices may ask
you to allow the Austrian Audio App access to your location information. This information is used by
the Bluetooth protocol only – we are not processing or tracking any kind of personal data.
Preparing the OC818
Switch the pattern selector to ''•'' (= Preset Mode - all the
way to the right)
Power (to) the OCR8
The OCR8 is powered by the phantom power from the OC818, so please make
sure that you are supplying the OC818 according to P48 (48V +/- 4V).
You may either connect the OC818 to phantom power first, or plug the OCR8
into the OC818 first. Once you have completed both steps, the OCR8 will
automatically switch into "pairing mode" and the blue LED will flash fast. Now
it is time to open the Austrian Audio App.