Austrian Audio 9000-0061-9949 소유자 매뉴얼 - 페이지 4

{카테고리_이름} Austrian Audio 9000-0061-9949에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Austrian Audio 9000-0061-9949 5 페이지. Large-diaphragm condenser microphone with multiple polar patterns

페이지 인쇄

Establishing the Bluetooth connection

After you open the app, click on "search for new devices" to connect to the OCR8. Enter the 6 digits

of the serial number (please include the "0" digits) that can be found on the sticker of the OCR8. This

is the password to identify that you have the right to connect to this device. (You do not want that

nerdy guy in the first row to connect to your microphone with his smartphone).

You can now start to work with the App's PolarPilot, which will give you full wireless control over the

OC818.

Tips for working with PolarPilot

We suggest you name your microphones first, especially if you own more than one (lucky you)!

Polar pattern:

You can change the polar pattern with the slider below the graphic. For small changes, you can also

use the ''-'' or ''+'' buttons. Please note that the microphone needs a few seconds to adapt to the

new pattern, especially if you switch all the way from figure-8 (left) to omni (right) or vice versa (this

gives any sluggish electrons time to catch up). Please also note that if you are using the slider, the

polar pattern will only start to adjust once you have released the slider!

High Pass Filter and Pad Switch:

The high pass filter and the pad switch can be remote controlled as well and work the same way as

the physical switches on the OC818. The physical switches on the OC818 are always inactive in Preset

Mode!

Override/Overload monitor:

At the bottom of the screen you will see the overload monitor. It will show an angry red bar if the

signal is too loud to be properly picked up by the microphone. In this case, you should use the "-10"

Pad Switch to resolve this issue. This will reduce bias voltage to the capsule and protect the mic's

internal circuitry from clipping.

Save Function:

You can save your favorite settings to easily retrieve them or program them into another OC818.

Please note that this setting is stored locally on your smart device.

Preset Mode:

If you unplug the OCR8, the OC818 will keep the latest pattern settings and store them in the "•"

(= Preset Mode) position. By setting the microphone to this position, you can always retrieve the

stored setting at any time, including Pad and High Pass settings.

Note that the hardware controls for Pad and High Pass on the microphone are overridden in Preset-

Mode and only become active again once you switch to another polar pattern position.

Using the PolarPilot as a Monitor:

If you do not switch the OC818 into the "•" (= Preset Mode) position and connect the OCR8, you can

still use PolarPilot as a monitor to see the pattern, pad and filter settings, as well as watching the

override monitor. Please note that you cannot make any adjustments unless you switch to "•"

(= Preset Mode) on the microphone.