4tronix Singalong Kit 어셈블리 - 페이지 2
{카테고리_이름} 4tronix Singalong Kit에 대한 어셈블리을 온라인으로 검색하거나 PDF를 다운로드하세요. 4tronix Singalong Kit 9 페이지.
1. Check you have the breadboard oriented correctly with row 1 at the left as shown in photo
2. Plug in the audio connector to d4, d5, d6 and f4, f5, f6
Step 3 – Make a 1cm Jumper Wire
Cut a 24mm piece of Black wire
•
Strip 7mm of each and bend over as shown above
•
You will now have a 10mm insulated wire, with 7mm bare wire on each end
•
Step 4 – Connect Audio Ground to Breadboard
Push the black jumper into hole j4 and the Ground strip as shown above
•
Singalong Kit Assembly