4tronix Singalong Kit Montaż - Strona 2

Przeglądaj online lub pobierz pdf Montaż dla Robotyka 4tronix Singalong Kit. 4tronix Singalong Kit 9 stron.

1. Check you have the breadboard oriented correctly with row 1 at the left as shown in photo

2. Plug in the audio connector to d4, d5, d6 and f4, f5, f6

Step 3 – Make a 1cm Jumper Wire

Cut a 24mm piece of Black wire

•

Strip 7mm of each and bend over as shown above

•

You will now have a 10mm insulated wire, with 7mm bare wire on each end

•

Step 4 – Connect Audio Ground to Breadboard

Push the black jumper into hole j4 and the Ground strip as shown above

•

Singalong Kit Assembly