4tronix Singalong Kit Montaż - Strona 5

Przeglądaj online lub pobierz pdf Montaż dla Robotyka 4tronix Singalong Kit. 4tronix Singalong Kit 9 stron.

Step 9 – Fit 10K trimPot

Orient the trimpot as shown and fit the centre pin into g13 (photo shows h13, but use g13)

•

The other two legs fit in h12 and h14

•

Step 10 – Add Power and Ground Links to Trimpot

Cut, strip and bend jumper wires as before

•

Use Red wire for positive and make 0.1" (2.5mm) shorter

•

Connect Red from Positive breadboard rail to hole j12

•

Connect Black from Negative breadboard rail to hole j14

•

Singalong Kit Assembly