4tronix Singalong Kit Assembly - Seite 5

Blättern Sie online oder laden Sie pdf Assembly für Robotik 4tronix Singalong Kit herunter. 4tronix Singalong Kit 9 Seiten.

Step 9 – Fit 10K trimPot
Orient the trimpot as shown and fit the centre pin into g13 (photo shows h13, but use g13)
The other two legs fit in h12 and h14
Step 10 – Add Power and Ground Links to Trimpot
Cut, strip and bend jumper wires as before
Use Red wire for positive and make 0.1" (2.5mm) shorter
Connect Red from Positive breadboard rail to hole j12
Connect Black from Negative breadboard rail to hole j14
Singalong Kit Assembly