4tronix Singalong Kit Montaj - Sayfa 5
Robotik 4tronix Singalong Kit için çevrimiçi göz atın veya pdf Montaj indirin. 4tronix Singalong Kit 9 sayfaları.
Sayfayı YazdırStep 9 – Fit 10K trimPot
Orient the trimpot as shown and fit the centre pin into g13 (photo shows h13, but use g13)
•
The other two legs fit in h12 and h14
•
Step 10 – Add Power and Ground Links to Trimpot
Cut, strip and bend jumper wires as before
•
Use Red wire for positive and make 0.1" (2.5mm) shorter
•
Connect Red from Positive breadboard rail to hole j12
•
Connect Black from Negative breadboard rail to hole j14
•
Singalong Kit Assembly