4tronix Singalong Kit Montaj - Sayfa 7

Robotik 4tronix Singalong Kit için çevrimiçi göz atın veya pdf Montaj indirin. 4tronix Singalong Kit 9 sayfaları.

Sayfayı Yazdır
Step 13 – Fit the Tact Switch and connect to Ground
Take care not to bend the pins on the switch
•
Push into holes d20, d22, g20, g22
•
Cut, strip and bend another piece of black jumper wire
•
Connect jumper from breadboard Ground rail to hole j22 (or i22 or h22)
•
Step 14 – Plug in McRoboFace
Connect to holes a11, a12, a13, a14 as shown
•
Singalong Kit Assembly