4tronix Singalong Kit Montaj - Sayfa 8
Robotik 4tronix Singalong Kit için çevrimiçi göz atın veya pdf Montaj indirin. 4tronix Singalong Kit 9 sayfaları.
Sayfayı YazdırStep 15 – Wire in McRoboFace
Split the strip of 10 jumper wires as follows:
•
o Brown, Red, Orange
o Black, White, Grey
o Violet, Blue, Green
You should have a single Yellow wire left (this is not needed)
•
Using the Brown, Red and Orange wires, connect as shown above:
•
o Brown (Ground) to c14
o Orange (Din) to c12
o Red (Vcc) to c11
Singalong Kit Assembly