4tronix Singalong Kit Montaż - Strona 7
Przeglądaj online lub pobierz pdf Montaż dla Robotyka 4tronix Singalong Kit. 4tronix Singalong Kit 9 stron.
Drukuj stronęStep 13 – Fit the Tact Switch and connect to Ground
Take care not to bend the pins on the switch
•
Push into holes d20, d22, g20, g22
•
Cut, strip and bend another piece of black jumper wire
•
Connect jumper from breadboard Ground rail to hole j22 (or i22 or h22)
•
Step 14 – Plug in McRoboFace
Connect to holes a11, a12, a13, a14 as shown
•
Singalong Kit Assembly