4tronix Multi-Apartment Video Door Entry System 사용자 설명서 - 페이지 3
{카테고리_이름} 4tronix Multi-Apartment Video Door Entry System에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 4tronix Multi-Apartment Video Door Entry System 8 페이지.
페이지 인쇄Door Unit Controls
1. Camera lens
2. Loudspeaker
3. Microphone
4. Call buttons
5. Connections for monitors (4 maximum)
6. Electronic lock connection (optional)
Door Unit Wiring Instructions
1. Connect the four-wire connections using 4-core cable. One cable
from the door unit separately to each monitor
2. The two-wire connection provides power for a 12V DC lock.
Connect your lock (optional accessory) to the two wire cable
3. Ensure that correct polarity is observed for all connections
4. Do not make connections to the terminals whilst power is on to
any device
5. This unit is intended to be mounted into the wall next to the door
so that only the face-plate is visible. You will need to remove
bricks, or cut a fixing hole for the mounting plate. It is possible to
mount it on the surface of the wall, but the security of your door
may be compromised by doing so.
6. Remove the covers of the 2 screws at the top and bottom of the
unit and fix to the wall.
7. The 4 metal brackets supplied should be fitted through the holes
on the sides, from the inside of the unit and fixed to the wall.
These create a vandal-proof installation
3
P a g e