4tronix Multi-Apartment Video Door Entry System Kullanıcı Kılavuzu - Sayfa 3

İnterkom sistemi 4tronix Multi-Apartment Video Door Entry System için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. 4tronix Multi-Apartment Video Door Entry System 8 sayfaları.

Sayfayı Yazdır

Door Unit Controls

1. Camera lens

2. Loudspeaker

3. Microphone

4. Call buttons

5. Connections for monitors (4 maximum)

6. Electronic lock connection (optional)

Door Unit Wiring Instructions

1. Connect the four-wire connections using 4-core cable. One cable

from the door unit separately to each monitor

2. The two-wire connection provides power for a 12V DC lock.

Connect your lock (optional accessory) to the two wire cable

3. Ensure that correct polarity is observed for all connections

4. Do not make connections to the terminals whilst power is on to

any device

5. This unit is intended to be mounted into the wall next to the door

so that only the face-plate is visible. You will need to remove

bricks, or cut a fixing hole for the mounting plate. It is possible to

mount it on the surface of the wall, but the security of your door

may be compromised by doing so.

6. Remove the covers of the 2 screws at the top and bottom of the

unit and fix to the wall.

7. The 4 metal brackets supplied should be fitted through the holes

on the sides, from the inside of the unit and fixed to the wall.

These create a vandal-proof installation

P a g e