4x4 TOUGH 21-50142U 사용 설명서 - 페이지 6

{카테고리_이름} 4x4 TOUGH 21-50142U에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 4x4 TOUGH 21-50142U 8 페이지. Roof racks

Parts for installation

Roof Racks for vehicles with elevated moulded (solid) roof rails

Roof racks for vehicles with elevated open roof rails.

INSTALLATION

1. Remove all contents from the box and ensure you have all the listed parts.

2. Slide the mounting brackets oﬀ the aluminium racks (4 in total).

3. Select the correct grips for your vehicles roof rails.

4. Position the mounting bracket as shown below; to enable clear visibility for aligning

the adjustment screw with the thread in the gripper pivot. (Refer 6A picture)

Adjustment Screw

Screw Pin

Grip

6. Rotate the gripper pivot with your ﬁnger to ensure it

is in alignment, allowing the adjustment screw be fed

through. Tighten loosely at this stage.

7. Cut the rubber strip for insert in the underside of the

roof rack rail, 250mm shorter than the distance between

the roof rails.

RAIL

ROOF

Allen key

4 x End Caps

5. Insert the adjustment screw through the screw

pin and grip on each of the mounting brackets.

Pic. 6A

4 x grey coloured

grips suitable for

elevated moulded

(solid) roof rails

4 x Screw pins

4 x Adjustment screws

4 x black coloured

grips suitable for

elevated open

roof rails

Gripper pivot