4x4 TOUGH 21-50142U Manuale di istruzioni - Pagina 6

Sfoglia online o scarica il pdf Manuale di istruzioni per Automobile Accessories 4x4 TOUGH 21-50142U. 4x4 TOUGH 21-50142U 8. Roof racks

Parts for installation

Roof Racks for vehicles with elevated moulded (solid) roof rails

Roof racks for vehicles with elevated open roof rails.

INSTALLATION

1. Remove all contents from the box and ensure you have all the listed parts.

2. Slide the mounting brackets oﬀ the aluminium racks (4 in total).

3. Select the correct grips for your vehicles roof rails.

4. Position the mounting bracket as shown below; to enable clear visibility for aligning

the adjustment screw with the thread in the gripper pivot. (Refer 6A picture)

Adjustment Screw

Screw Pin

Grip

6. Rotate the gripper pivot with your ﬁnger to ensure it

is in alignment, allowing the adjustment screw be fed

through. Tighten loosely at this stage.

7. Cut the rubber strip for insert in the underside of the

roof rack rail, 250mm shorter than the distance between

the roof rails.

RAIL

ROOF

Allen key

4 x End Caps

5. Insert the adjustment screw through the screw

pin and grip on each of the mounting brackets.

Pic. 6A

4 x grey coloured

grips suitable for

elevated moulded

(solid) roof rails

4 x Screw pins

4 x Adjustment screws

4 x black coloured

grips suitable for

elevated open

roof rails

Gripper pivot