Bender NGRM700 빠른 시작 매뉴얼
{카테고리_이름} Bender NGRM700에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bender NGRM700 8 페이지. Neutral grounding resistor monitor (ngr)
Bender NGRM700에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (8 페이지), 매뉴얼 (8 페이지), 빠른 시작 매뉴얼 (8 페이지)
페이지 인쇄Quickstart
NGRM700
EN
Neutral Grounding Resistor Monitor
Intended use
The NGRM700 is only intended for use in high-resistance earthed sys-
tems. In these systems, the NGRM700 monitors
the current through the NGR,
the voltage between the star point of the transformer and earth
(voltage drop across the NGR),
the condition of the neutral grounding resistor (NGR),
line-to-line and line-to-earth voltages.
This quick-start guide does not replace the operating manual of the device.
Download:
www.bender.de/manuals
Safety instructions
Risk of electrocution due to electric shock!
Touching live parts of the system carries the risk of:
DANGER
Before installing and connecting the device, make sure that the installation has
been de-energised. Observe the rules for working on electrical installations.
Removing FP200-NGRM
PH 1
Connection X1
I1
I2
I3
A
B
M+
Q2
Q1
+
NGRM700_D00292_02_Q_XXEN/06.2018
An electric shock
Damage to the electrical installation
Destruction of the device
1
X1
ET H
R
I1
Pulser IN
I2
Reset IN
I3
Test IN
A
Modbus RTU (A)
B
Modbus RTU (B)
Ground
M+
Analogue output
Q2
Open Collector: Pulser OUT
Q1
Open Collector: System health
+
Output for supply of external relays (+24 V, max. 100 mA)
X1
ET H
R
OFF
ON
RJ45:
Remote
max. 5 m
Switch
RJ45:
Ethernet
1