Adec A-dec+ 43.0531.00 설치 매뉴얼 - 페이지 5

{카테고리_이름} Adec A-dec+ 43.0531.00에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Adec A-dec+ 43.0531.00 12 페이지.

Power the Gateway Using the External Power Supply

Fire hazard. Use only the external power supply provided with the Gateway. Using another

WARNING

external power supply might result in a fire hazard. Another power supply might also result in an

inability to meet conducted emissions standards.

1. Plug the external power supply into an outlet.

2. Plug the external power supply cable into the Gateway.

3. Plug one end of the red DCS2 data line into a DCS2 data port on the chair circuit board.

4. Plug the other end of the red DCS2 data line into the DCS2 port Gateway.

5. If you will use Ethernet instead of Wi-Fi for the network connection:

(1) Connect one end of the Ethernet cable to the Gateway.

(2) Connect the other end of the Ethernet cable to a router.

A-dec 511 Shown

Next Step See "Connect to A-dec+" on page 11.

86.0924.00 Rev B

DCS2 Data Line

A-dec+ Gateway Installation Guide

Ethernet Cable