Adec A-dec+ 43.0531.00 설치 매뉴얼 - 페이지 6

{카테고리_이름} Adec A-dec+ 43.0531.00에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Adec A-dec+ 43.0531.00 12 페이지.

A-dec+ Gateway Installation Guide
A-dec 311B/411 Power Supply Manufactured Before June 2023
You can power the Gateway using the chair circuit board or the external power supply. Complete one of the
following procedures based on how the Gateway will be powered.
Power the Gateway Using the Chair Circuit Board . . . . . . . . . 6
Power the Gateway Using the External Power Supply . . . . . . 7
Power the Gateway Using the Chair Circuit Board
1. Plug the black with white stripe wire of the pigtail power cable into the 0 V connector.
2. Plug the black wire of the pigtail power cable into the 24 V connector.
3. Plug the pigtail connector into the Gateway.
4. Plug one end of the DCS1 data line into a DCS1 data port on the chair circuit board.
5. Plug the other end of the DCS1 data line into the DCS1 port on the Gateway.
6. If you will use Ethernet instead of Wi-Fi for the network connection:
(1) Connect one end of the Ethernet cable to the Gateway.
(2) Connect the other end of the Ethernet cable to a router.
1
0 V
5
Next Step See "Connect to A-dec+" on page 11.
6
2
24 V
4
Pigtail
3
DCS1 Data Line
5
3
A-dec 311 Shown
6
Ethernet Cable
86.0924.00 Rev B