dymax ECE ZIP Shutter 사용자 설명서 - 페이지 8
{카테고리_이름} dymax ECE ZIP Shutter에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. dymax ECE ZIP Shutter 20 페이지. For use with dymax ece flood lamp systems
페이지 인쇄Dymax ECE ZIP™ Shutter User Guide
8
Installation and System Interconnect
NOTE: Setup of the ECE flood lamps is covered in the ECE-series user guides. Refer to MAN045 – ECE-Series
Flood Lamp User Guide.
ECE 5000 Flood Lamp
1. Remove the Mounting Plate from the ZIP Shutter by removing the four M4 x 8 mm flat head screws (Figure 3).
Figure 3. ECE ZIP Shutter with Mounting Plate Installed
NOTE: If the ZIP Shutter and the Lamp Assembly are NOT installed into a Light Shield, the Glass
Containment Shield must be installed.
2. Install the Glass Shield (if applicable). Follow the instructions below:
Remove the Filler Plate from the Reflector Housing and install the glass on the Reflector Housing
edges.
Replace the Filler Plate and screws securely.
Figure 4. Reflector Housing with Filler Plate
3. Place the Mounting Plate onto the Reflector Housing (Figure 6) and then place the Air Plenum on top of
the Mounting Plate (Figure 7). Attach all three components together with four new M4 x 25 mm screws.
M4 x 8 mm Flat Head Screws
Mounting Plate
Figure 5. Reflector Housing, Filler Plate
Removed