dymax ECE ZIP Shutter User Manual - Page 8

Browse online or download pdf User Manual for Lighting Equipment dymax ECE ZIP Shutter. dymax ECE ZIP Shutter 20 pages. For use with dymax ece flood lamp systems

Print Page
Dymax ECE ZIP™ Shutter User Guide
8

Installation and System Interconnect

NOTE: Setup of the ECE flood lamps is covered in the ECE-series user guides. Refer to MAN045 – ECE-Series
Flood Lamp User Guide.
ECE 5000 Flood Lamp
1. Remove the Mounting Plate from the ZIP Shutter by removing the four M4 x 8 mm flat head screws (Figure 3).
Figure 3. ECE ZIP Shutter with Mounting Plate Installed
NOTE: If the ZIP Shutter and the Lamp Assembly are NOT installed into a Light Shield, the Glass
Containment Shield must be installed.
2. Install the Glass Shield (if applicable). Follow the instructions below:
Remove the Filler Plate from the Reflector Housing and install the glass on the Reflector Housing
edges.
Replace the Filler Plate and screws securely.
Figure 4. Reflector Housing with Filler Plate
3. Place the Mounting Plate onto the Reflector Housing (Figure 6) and then place the Air Plenum on top of
the Mounting Plate (Figure 7). Attach all three components together with four new M4 x 25 mm screws.
M4 x 8 mm Flat Head Screws
Mounting Plate
Figure 5. Reflector Housing, Filler Plate
Removed