Dymo LabelManager 210D 사용자 설명서 - 페이지 8
{카테고리_이름} Dymo LabelManager 210D에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dymo LabelManager 210D 13 페이지. Easy-to-use label maker for your desktop
Dymo LabelManager 210D에 대해서도 마찬가지입니다: 개요 (12 페이지), 빠른 매뉴얼 (2 페이지)
페이지 인쇄
To set the label length
Press
until the
1
Use the navigation keys to select Length and
2
press
.
Select Fixed and press
3
Set the length for your label and press
4
Using the Label Maker Memory
The label maker has a powerful memory feature that
allows you to save the text of up to nine frequently-used
labels. You can recall saved labels and you can insert
saved text into a label.
Saving a Label
You can save up to nine frequently-used labels. When
you save a label, the text and all formatting are saved.
To save the current label
Press
until the
1
Use the navigation keys to select Save and
2
press
.
The first available memory location is displayed.
Use the navigation keys to move through the
3
locations.
You can store new text in any of the memory
locations.
Select a memory location and press
4
Your label text is saved and you are returned to the label.
To clear a memory location, first select a memory location
and then press
.
Opening Saved Labels
You can easily open labels saved in memory to use at a
later time.
To open saved labels
Press
until the
1
Use the navigation keys to select Open and
2
press
.
The first memory location is displayed.
Use the navigation keys to select a label to open and
3
press
.
If the display currently contains label content, a
message is displayed to confirm you want to
overwrite the current label.
menu appears.
.
.
menu appears.
.
menu appears.
Caring for Your Label Maker
Your label maker is designed to give you long and
trouble-free service, while requiring very little
maintenance. Clean your label maker from time to time to
keep it working properly. Clean the cutter blade each time
you replace the label cassette.
Cutter blade is extremely sharp. Avoid direct contact
with the cutter blade while cleaning the blade.
To clean the cutter blade
Remove the label cassette.
1
Press and hold the cutter
2
button to expose the cutter
blade. See Figure 6.
Use a cotton ball and
3
alcohol to clean both sides
of the blade.
To clean the print head
Remove the label cassette.
1
Remove the cleaning tool from inside the label
2
compartment cover.
If you do not have a cleaning tool, contact DYMO
3
Customer Care (http://support.dymo.com).
Gently wipe the padded side of the tool across the
4
print head. See Figure 6.
6
Press
Print head
and hold
Figure 6