Dymo LabelManager 210D 사용자 설명서 - 페이지 9
{카테고리_이름} Dymo LabelManager 210D에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dymo LabelManager 210D 13 페이지. Easy-to-use label maker for your desktop
Dymo LabelManager 210D에 대해서도 마찬가지입니다: 개요 (12 페이지), 빠른 매뉴얼 (2 페이지)
페이지 인쇄
Troubleshooting
Review the following possible solutions if you encounter a
problem while using your label maker.
Problem/Error
Solution
Message
No display
Poor Print Quality
Poor Cutter Performance Clean the cutter blade. See See
Caring for Your Label Maker on
page 6.
Printing . . .
No action required.
Message disappears when printing is
finished.
Too many characters
Delete some or all of the buffer text.
Exceeded maximum
number of characters in
buffer.
Too many lines
Exceeded maximum
number of lines
Replace batteries or connect AC
power adapter.
Batteries almost
discharged.
Tape Jam
Motor is stalled due to
label jam.
If you still need assistance, contact DYMO Customer
Support at https://support.dymo.com.
Ensure the label maker is turned
on.
Replace discharged batteries.
Replace batteries or attach power
adapter.
Set Contrast to higher level. See
Adjusting the Print Contrast.
Ensure label cassette is installed
properly.
Clean the print head.
Replace the label cassette.
Delete a line to fit on the label
width.
Insert a wider label cassette.
Remove jammed label; replace
label cassette.
Clean cutter blade.
7