Dymo LabelManager 210D Kullanıcı Kılavuzu - Sayfa 9
Etiket makinesi Dymo LabelManager 210D için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dymo LabelManager 210D 13 sayfaları. Easy-to-use label maker for your desktop
Ayrıca Dymo LabelManager 210D için: Genel Bakış (12 sayfalar), Hızlı Kılavuz (2 sayfalar)
Sayfayı Yazdır
Troubleshooting
Review the following possible solutions if you encounter a
problem while using your label maker.
Problem/Error
Solution
Message
No display
Poor Print Quality
Poor Cutter Performance Clean the cutter blade. See See
Caring for Your Label Maker on
page 6.
Printing . . .
No action required.
Message disappears when printing is
finished.
Too many characters
Delete some or all of the buffer text.
Exceeded maximum
number of characters in
buffer.
Too many lines
Exceeded maximum
number of lines
Replace batteries or connect AC
power adapter.
Batteries almost
discharged.
Tape Jam
Motor is stalled due to
label jam.
If you still need assistance, contact DYMO Customer
Support at https://support.dymo.com.
Ensure the label maker is turned
on.
Replace discharged batteries.
Replace batteries or attach power
adapter.
Set Contrast to higher level. See
Adjusting the Print Contrast.
Ensure label cassette is installed
properly.
Clean the print head.
Replace the label cassette.
Delete a line to fit on the label
width.
Insert a wider label cassette.
Remove jammed label; replace
label cassette.
Clean cutter blade.
7