Dymo LabelManager 350D 사용자 설명서 - 페이지 5
{카테고리_이름} Dymo LabelManager 350D에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dymo LabelManager 350D 20 페이지. Desktop label maker
Dymo LabelManager 350D에 대해서도 마찬가지입니다: 빠른 매뉴얼 (2 페이지)
페이지 인쇄
About Your New Label Maker
With your new DYMO LabelManager 350D electronic label
maker, you can create a wide variety of high-quality,
self-adhesive labels. You can choose to print your labels in
many different sizes and styles. The label maker uses DYMO D1
tape cassettes in widths of 6 mm (1/4"), 9 mm (3/8"), 12 mm
(1/2"), or 19 mm (3/4"). These tape cassettes are available in a
wide range of materials.
Visit www.dymo.com for information on obtaining tapes
and accessories for your label maker.
Warranty Registration
Visit www.dymo.com/registration to register your label
make online.
Getting Started
Follow the instructions in this section to print your first label.
Connecting the Power
The label maker can operate on AC or battery power. To save
power, the label maker will automatically turn off after two
minutes of inactivity.
Inserting the Batteries
The label maker uses six AA batteries.
To insert the batteries
1.
Remove the battery compartment cover. See Figure 2.
Figure 2
2.
Insert the batteries following the polarity markings
(+ and –).
3.
Close the compartment door.
x
Remove the batteries if the label maker will not be used
for a long period of time.
Connecting the Power Adapter
Connecting the power adapter to the label maker disconnects
the batteries as a power source.
To connect the power adapter
1.
Plug the power adapter into the power connector on the
top, left side of the label maker.
2.
Plug the other end of the power adapter into a power
outlet.
x
Make sure you disconnect the label maker from the power
adapter before you unplug the adapter from the main power
source. Otherwise, the most recent memory settings will be
lost.
Inserting the Tape Cassette
Your label maker comes with one DYMO D1 tape cassette.
Visit www.dymo.com for information about purchasing
additional tape cassettes.
To insert the tape cassette
1.
Press and release the tape cassette cover to open the tape
compartment. See Figure 3.
Figure 3
5