Dymo LabelManager 350D 사용자 설명서 - 페이지 7

{카테고리_이름} Dymo LabelManager 350D에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dymo LabelManager 350D 20 페이지. Desktop label maker
Dymo LabelManager 350D에 대해서도 마찬가지입니다: 빠른 매뉴얼 (2 페이지)

페이지 인쇄

Getting to Know the Label Maker

The following sections describe each feature in detail. Become

familiar with the location of the feature and function keys on

your label maker. See Figure 1.

Power

The

button turns the power on and off. After two minutes

of no activity, the power is switched off automatically. The last

label created is remembered and displayed when the power

is turned back on. The previously selected style settings are

also restored.

LCD Display

The label maker's LCD display shows a row of sixteen

characters. However, you can enter up to 99 characters/spaces.

Feature indicators appear on the display to let you know when

a feature is selected. See Figure 6.

Style

Font

Figure 6

Box/

Scrollbar

Underline

CAPS Mode

The

key toggles capitalization on and off. When CAPS

mode is turned on, the CAPS mode indicator is shown on the

display and all letters that you enter will be capitalized. When

CAPS mode is off, all letters entered appear in lower case.

Shift Key

The

key, when used in combination with an alphabet

key, changes the case of the selected letter. When used in

combination with number keys or function keys, the

key selects the alternate function shown on the key. For

example, when you press

the cursor is deleted; however, when you press

together, the entire label text and formatting is deleted and

the display is ready for you to type a new label.

Space Bar

The Space Bar inserts one blank space in your text.

Backspace

The

key removes the character to the left of the cursor.

clears all the label text and formatting.

Cancel

The

key allows you to exit from a menu without making

a selection or to cancel an action.

Navigation Keys

You can review and edit your label using the left and right

arrow keys. You can navigate through the menu selections

using the up and down arrow keys. You then press

make your selection.

the character to the left of