510 DESIGN 5DS153-0045 조립 지침

{카테고리_이름} 510 DESIGN 5DS153-0045에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. 510 DESIGN 5DS153-0045 3 페이지. Crewe resin table lamp

Important Safety Instructions:



For safety purpose, this lamp is equipped with a polarized plug (one blade is wider than the other). If the plug does

not fit securely into your outlet, do not force it, contact a professional electrician. Never alter the plug in any way.



These instructions are provided for your safety. It is very important that they are read carefully and completely

before assembling fixture.



This fixture has been rated for up to (1) 60-watt maximum TYPE A bulb or (1) 13-watt compact fluorescent

light bulb . To avoid the risk of fire, do not exceed the recommended wattage.



This lighting fixture is intended for indoor, residential use.

Warning:



Wires and cables are all attached (further wiring is not needed from consumer). When unpacking product, be

careful to not pull wires as it may result in a bad connection. Do not plug into electrical outlet until lamp is fully

assembled.



To reduce the risk of fire, electrical shock or personal injury, do not turn on light fixture until light bulb is installed

and assembly is complete.



Always turn off the light fixture and allow it to cool before replacing the light bulb.

 Care instructions:



Wipe with soft dry cloth only



Always avoid the use of harsh chemicals or abrasives as they may damage

ASSEMBLY INSTRUCTIONS

Crewe Resin Table Lamp (Item#5DS153-0045)

Page 1 of 3