510 DESIGN 5DS153-0045 조립 지침 - 페이지 3

{카테고리_이름} 510 DESIGN 5DS153-0045에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. 510 DESIGN 5DS153-0045 3 페이지. Crewe resin table lamp

Assembly Instruction:

Step1. Unpack and place all parts on a surface or floor.

Step2. Put the lamp body (H) on the table, gently pull the cord so that the neck comes into contact with the body (H).

Screw the socket (F) and saddle(G) onto the lamp body (H)

Step 3. Raise the harp caps (E) and insert the bottom ends of harp (D) into the saddle (G.)

Step 4. Lower the harp caps (E) until they cover the two-pronged saddle (G)

Step 5. Place the shade (B) over the harp (D) making sure the harp top (C) extends through the top ring of shade (B).

Secure the shade (B) by turning the finial (A) onto the harp top (C) clockwise until tight.

Step6. Screw the light bulb into the socket (F).

Step7. Assembly is completed.

Page 3 of 3