510 DESIGN 5DS153-0045 Інструкція з монтажу - Сторінка 3
Переглянути онлайн або завантажити pdf Інструкція з монтажу для Зовнішнє освітлення 510 DESIGN 5DS153-0045. 510 DESIGN 5DS153-0045 3 сторінки. Crewe resin table lamp
Друкувати сторінкуAssembly Instruction:
Step1. Unpack and place all parts on a surface or floor.
Step2. Put the lamp body (H) on the table, gently pull the cord so that the neck comes into contact with the body (H).
Screw the socket (F) and saddle(G) onto the lamp body (H)
Step 3. Raise the harp caps (E) and insert the bottom ends of harp (D) into the saddle (G.)
Step 4. Lower the harp caps (E) until they cover the two-pronged saddle (G)
Step 5. Place the shade (B) over the harp (D) making sure the harp top (C) extends through the top ring of shade (B).
Secure the shade (B) by turning the finial (A) onto the harp top (C) clockwise until tight.
Step6. Screw the light bulb into the socket (F).
Step7. Assembly is completed.
Page 3 of 3