Dymo LabelWriter 450 Turbo 빠른 시작 매뉴얼 - 페이지 6
{카테고리_이름} Dymo LabelWriter 450 Turbo에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dymo LabelWriter 450 Turbo 20 페이지. How to order and insert a roll of labels in the dymo labelwriter
Dymo LabelWriter 450 Turbo에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (14 페이지), 개요 (2 페이지), 설정 매뉴얼 (11 페이지), 빠른 시작 매뉴얼 (10 페이지), 사용자 설명서 (19 페이지), 설치 매뉴얼 (4 페이지), 사용 설명서 (3 페이지)
페이지 인쇄
3. Connecting your LabelWriter Printer
Do not connect the printer to your computer until after the
NOTE
software installation is complete.
To connect the power
Plug the power cord into the power adapter. See Figure 3.
1
Plug the power adapter into the power connector on the
2
bottom of the printer. See Figure 4.
Plug the other end of the power cord into a power outlet.
3
Plug the USB cable into the USB port on the bottom of
4
the printer.
Insert the power and USB cables through the cable channel
5
and set the printer down.
When the software is completely installed, connect the
6
other end of the USB cable into an available USB port on
your computer.
If the printer is not in the printer list when the installation is complete, refer
Mac OS
to the ReadMe file for instructions on how to add the printer.
4
Power adapter
Power cord
Figure 3
USB
USB
24VDC
Cable
channel
Figure 4
Power