Dymo LabelWriter 450 Turbo 사용자 설명서 - 페이지 13

{카테고리_이름} Dymo LabelWriter 450 Turbo에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dymo LabelWriter 450 Turbo 19 페이지. How to order and insert a roll of labels in the dymo labelwriter
Dymo LabelWriter 450 Turbo에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (20 페이지), 빠른 시작 매뉴얼 (14 페이지), 개요 (2 페이지), 설정 매뉴얼 (11 페이지), 빠른 시작 매뉴얼 (10 페이지), 설치 매뉴얼 (4 페이지), 사용 설명서 (3 페이지)

페이지 인쇄
Dymo LabelWriter 450 Turbo 사용자 설명서
Your LabelWriter printer should offer years of trouble-free printing with very little maintenance.
However, in the event that you encounter a problem, this chapter offers suggestions for resolving
problems that can occur when using the printer. If you are unable to solve a problem, this chapter
also describes how to contact DYMO Technical Support.

Troubleshooting

This section provides information on how to detect and correct problems you might encounter
while using your LabelWriter printer.

Status Light

The status light visually shows the current state of the printer:
•
•
•

Performing a Printer Self-Test

If you experience problems with broken characters or other print quality issues, perform a printer
self-test. The self-test verifies that all elements of the print head and printing mechanism are in
working condition.
To perform a self-test
1
2
3

Clearing Label Jams

To clear labels that have become jammed in the printer
1
2
Solid blue - power is on and the printer is ready.
Flashing blue - labels are not loaded properly or the label roll is empty.
Dimmed blue - printer is in power saving mode.
With a roll of labels in the printer, press and hold the form-feed button on the front of the
printer for five to ten seconds.
The printer begins printing vertical lines along the width of the printer. The test pattern
automatically changes every 3/4 inch (19 mm).
Once the self-test begins, release the form-feed button.
To stop the self-test, press and release the form-feed button.
Tear off any labels that have already fed
through the printer.
Press the platen release lever forward
and pull the jammed label out of the
platen mechanism.
Chapter 4

Getting Help

Press platen
release forward
9