Gadget Labs WavePRO ADAT 사용자 설명서 - 페이지 4

{카테고리_이름} Gadget Labs WavePRO ADAT에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gadget Labs WavePRO ADAT 15 페이지. Option cards

INSTALLING THE SPDIF OR ADAT OPTION CARD

& SOFTWARE DRIVERS

Œ Œ

STEP

Shut down and turn off your PC

Before you begin installing an option card, please note:

Static electricity can damage electronic components!

Take the following precaution before you install the option

card:

Shut down and turn off the PC but leave it plugged in. Touch

the metal chassis of the PC to drain the static from your bod J

before you touch the WavePRO PCI card or the option card.

Next, unplug the PC's power cable. Follow the steps in your PC's

user manual and remove the PC chassis cover.

•

STEP

Disconnect all cables from your WavePRO PCI card

and remove the PCI card from your PC.

For the Wave/824 or Wave/496, disconnect the Patch Box

cable from the WavePRO PCI card. For the Wave/424,

disconnect and audio cables from the card.

Ž Ž

STEP

Connect the gray signal

cable that came with the

option card to the back of

the SPDIF or ADAT card.

Don't worry -- the connectors are

keyed & there's no way to plug in

the signal cable incorrectly.