Gadget Labs WavePRO ADAT 사용자 설명서 - 페이지 6

{카테고리_이름} Gadget Labs WavePRO ADAT에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gadget Labs WavePRO ADAT 15 페이지. Option cards

OUT

Purcell, CA

P108-000

Wave/824 JP2 connector to SPDIF RCA Jacks

' '

STEP

CONFIGURING THE DIGITAL I/O BRACKET

Note: if you have a Wave/824 with a SPDIF option card and you

are not using the Digital I/O bracket, skip to Step 9

The Digital I/O bracket is required for the ADAT option card. It

is also required when using the SPDIF option card with either the

Wave/424 or the Wave/496. It can also be used as an option

with the Wave/824 (to facilitate optical connections).

The Digital I/O bracket includes a small circuit board and this

circuit board is connected to the SPDIF or ADAT option card via a

gray signal cable.

Before you install the Digital I/O bracket, you'll need to check

the jumper strapping. The jumper strapping consists of jumper

blocks that are connected across pins to create a circuit

connection.

Wave/824 PCI card connections

25-pin connector for

cable to Patch box

RCA-type jacks for

SPDIF option card

OUT

For the Wave/824

card with SPDIF-

via-RCA jacks,

here's how the

finished

connections

should look.