Gadget Labs WavePRO ADAT Podręcznik użytkownika - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Karta dźwiękowa Gadget Labs WavePRO ADAT. Gadget Labs WavePRO ADAT 15 stron. Option cards

IN
OUT
Purcell, CA
P108-000
Wave/824 JP2 connector to SPDIF RCA Jacks
' '
STEP
CONFIGURING THE DIGITAL I/O BRACKET
Note: if you have a Wave/824 with a SPDIF option card and you
are not using the Digital I/O bracket, skip to Step 9
The Digital I/O bracket is required for the ADAT option card. It
is also required when using the SPDIF option card with either the
Wave/424 or the Wave/496. It can also be used as an option
with the Wave/824 (to facilitate optical connections).
The Digital I/O bracket includes a small circuit board and this
circuit board is connected to the SPDIF or ADAT option card via a
gray signal cable.
Before you install the Digital I/O bracket, you'll need to check
the jumper strapping. The jumper strapping consists of jumper
blocks that are connected across pins to create a circuit
connection.
Wave/824 PCI card connections
25-pin connector for
cable to Patch box
IN
RCA-type jacks for
SPDIF option card
OUT
5
For the Wave/824
card with SPDIF-
via-RCA jacks,
here's how the
finished
connections
should look.