Active Products YE03 소유자 매뉴얼 - 페이지 8
{카테고리_이름} Active Products YE03에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Active Products YE03 10 페이지. 1450 psi electric pressure washer
페이지 인쇄ASSEMBLY AND OPERATING INSTRUCTIONS
SHUTTING DOWN AND CLEANING UP
1
Turn the switch to "OFF" (0) position.
2
Unplug the power cord from the outlet.
3
Turn off the water supply.
4
Press trigger to release any remaining water pressure.
5
Disconnect the garden hose from the unit.
6
Engage the gun safety lock.
WARNING
Turn off water supply and squeeze trigger to depressurize the unit. Failure to do so
could result in personal injury due to discharge of high-pressure water.
TAKING A BREAK
If taking a break of five minutes or more:
1
Engage gun safety lock.
2
Turn unit to "OFF" (O) position.
3
Unplug the power cord from the outlet.
CAUTION
Never use:
• Bleach, chlorine products and other corrosive chemicals
• Liquids containing solvents (i.e., paint thinners, gasoline, oils)
• Tri-sodium phosphate products
• Ammonia products
• Acid-based products
These chemicals will harm the unit and will damage the surface being cleaned.
13
WINTERIZING AND LONG-TERM STORAGE
OPTIMUM WINTERIZING PROCEDURE
Winterizing your pressure washer will help protect and prolong its life. We strongly
recommend you follow the below steps using Pressure Washer Pump Saver (39-8602-0).
This will keep the internal parts lubricated, protected from rust, and prevents the pump
from freezing.
1
Connect Pressure Washer Pump Saver hose onto the adaptor and quick-connect
coupling.
2
Depress button on top of Pump Saver container.
3
Continue until fluid exits the pressure hose.
4
Remove the hose from pump inlet.
QUICK WINTERIZING PROCEDURE
If you cannot do the Optimum Winterizing procedure, you can still protect your pressure
washer from winter-damage by doing below:
1
Disconnect all water connections.
2
Turn on the machine for a few seconds,
until the remaining water in the pump
exits. Turn off immediately.
3
Do not allow high-pressure hose to
become kinked.
4
Store the machine and accessories
in a room that does not reach freezing
temperatures. Do not store near
furnace or other sources of heat as it
may dry out the pump seals.
CAUTION
Drain gun assembly of any remaining water. Aim gun downwards and squeeze trigger.
Recommended: Pressure Washer Pump
Saver (39-8602-0)
14